Tcom Automatic Gates Barrier & Turnstiles 

Automatic Gates Barriers & Turnstiles

Looking to change your current security contract?

Click Here

Gate Automation, Traffic Barriers & Turnstiles

TCom Fire & Security are specialists in the design, installation and maintenance of Automatic Gate, Barrier and Turnstile Equipment, controls and ancillary safety devices. Since 1990 we have been an approved distributor/installer /maintenance provider of FAAC Automation Equipment. This range of equipment has been rigorously tested and designed to meet all current safety regulations and obtain the best performance and reliability of any products within the automation industry.

                   

Our specialists will supply you with no obligation advice and quotation to supply your gates or convert and enhance your existing gates to take one of the many alternatives in automatic operators and enable you to control the open/close cycles via in-car transmitter, keypad code or intercom linked to any associated property.

The following Codes of Practice demonstrate the requirement for competency in critical areas such as Design, Installation and Safety, Commissioning and Inspection Routines and a robust Local Management Process to guarantee optimum performance and reliability from the equipment.

Gate Automation, Traffic Barriers & Turnstiles – Codes of Practice

BS EN 12635:2002:- Industrial, commercial and garage doors and gates - Installation and use
BS EN 12604:2000:- Industrial, commercial and garage doors and gates - Mechanical Aspects.
BS EN 12453:2001:- Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements. That includes:
Section 4: Hazards, hazardous situations, hazardous events
Sub-section 4.1.1: Hazards caused by crushing, shearing and drawing-in points
A hazardous point is considered to exist up to a height of 2.5m above the floor or any other permanent access level, and when it occurs:

Automatic Operators - Swing Gates

We provide a wide variety of Automation Equipment. Our Swing Gate products are the perfect solution for electric swing gates and range from operators that are suited to small pedestrian gates, right up to operators suited for commercial heavy duty applications on gates up to 7m per leaf.

Swing Gate automation products can be electro-mechanical or hydraulic, which can be mounted either onto the gate or in the ground below the gate replacing the bottom hinge/s. Swing Gate automation adds security, convenience and safety to gates. Mobile Phone, Radio Control, Intercom, Code or Tag/Card are options which will provide the means to control access to authorised persons or vehicles only and enable your gates to be opened remotely, and add to the convenience.

Series 390 Residential Swing Gate

Series 390 – Residential Swing Gate Operator (Electro-mechanical)

  • Suitable for gates up to 3m per leaf.
  • Ideal choice for large pillars.
  • Self-locking in Open/Close positions.
  • Manual Over-ride Key.
  • Low maintenance and highly reliable.
  • Electronic Anti-crush Safety.
  • Articulated arm for easy installation.
  • Operating Temp Range -20c to + 55c.

Series 391 – Residential Swing Gate Operator (Electro-mechanical)

  • Suitable for Residential gates up to 2m per leaf.
  • Ideal choice for narrow pillars.
  • Self-locking in Open/Close positions.
  • Manual Over-ride Switch
  • Low maintenance and highly reliable.
  • Integrated Control Board. Master & Slave Versions.
  • Electronic Anti-crush Safety.
  • Articulated arm for easy installation.
  • Operating Temp Range -20c to + 55c.
Series S418 Residential Swing Gate Operator (Electro-mechanical)

Series S418 Residential Swing Gate Operator (Electro-mechanical)

  • Suitable for gates up to 2.3 per leaf.
  • High Speed operating cycle
  • Integrated Mechanical Stops
  • Self-locking in Open/Close positions.
  • Manual Over-ride Switch.
  • Low maintenance and highly reliable.
  • Electronic Anti-crush Safety.
  • Low Power Consumption
  • Operating Temp Range -20C to + 55C
Series 400 Residential & Industrial Swing Gate Operator (Hydraulic)

Series 400 Residential & Industrial Swing Gate Operator (Hydraulic)

  • Suitable for gates up to 7m per leaf.
  • High Power & Heavy Duty use.
  • Hydraulic Lock in Open/Close positions.
  • Manual Over-ride Switch
  • Low maintenance and highly reliable.
  • Electronic Anti-crush Safety.
  • Low Power Consumption
  • Operating Temp Range -40C to + 55C

Series 402 – Residential Swing Gate Operator (Hydraulic)

  • Suitable for gates up to 1.8m per leaf.
  • Ideal where space is limited.
  • Hydraulic Lock in Open/Close positions.
  • Manual Over-ride Switch
  • Low maintenance and highly reliable.
  • Electronic Anti-crush Safety.
  • Low Power Consumption
  • Operating Temp Range -40C to + 55C
Series 412 – Residential Swing Gate Operator (Electro-mechanical)

Series 412 – Residential Swing Gate Operator (Electro-mechanical)

  • Suitable for gates up to 1.8m per leaf.
  • Ideal where space is limited.
  • Self-locking in Open/Close positions.
  • Manual Over-ride Switch
  • Low maintenance and highly reliable.
  • Electronic Anti-crush Safety.
  • Low Power Consumption
  • Operating Temp Range -20C to + 55C
Series 413 – Residential Swing Gate Operator (Electro-mechanical)

Series 413 – Residential Swing Gate Operator (Electro-mechanical)

  • Suitable for gates up to 1.8m per leaf.
  • Limit Switch versions.
  • Self-locking in Open/Close positions.
  • Manual Over-ride Switch
  • Low maintenance and highly reliable.
  • Electronic Anti-crush Safety.
  • Energy efficient.
  • Operating Temp Range -20C to + 55C
Series 770 – Residential Swing Gate Operator (Electro-mechanical)

Series 770 – Residential Swing Gate Operator (Electro-mechanical)

  • Suitable for gates up to 2.5m per leaf.
  • Max Leaf Weight 500Kg.
  • Mechanical Stop options.
  • Self-locking in Open/Close positions.
  • Key Operated Over-ride.
  • Low maintenance and highly reliable.
  • Electronic Anti-crush Safety.
  • 240v AC Energy efficient.
  • Operating Temp Range -20C to + 55C.
Series S800 – Residential Swing Gate Operator (Hydraulic)

Series S800 – Residential Swing Gate Operator (Hydraulic)

  • Suitable for gates up to 4m per leaf.
  • Max Leaf Weight 800Kg.
  • High Speed Operating Cycle.
  • 100°-180° Opening Angles.
  • Hydraulic Lock in Open/Close positions.
  • Manual Over-ride Switch
  • Low maintenance and highly reliable.
  • Electronic Anti-crush Safety.
  • 24v DC Low Power Consumption
Series 750 – Residential Swing Gate Operator (Hydraulic)

Series 750 – Residential Swing Gate Operator (Hydraulic)

  • Suitable for gates up to 3.5m per leaf.
  • Max Leaf Weight 800Kg.
  • 100°-180° Opening Angles.
  • Remote Hydraulic Pump.
  • Hydraulic Lock in Open/Close positions.
  • Manual Over-ride Switch
  • Low maintenance and highly reliable.
  • Electronic Anti-crush Safety.
  • 240v AC Low Power Consumption
  • Operating Temp Range -40C to + 55C
Series 760 – Residential Swing Gate Operator (Hydraulic)

Series 760 – Residential Swing Gate Operator (Hydraulic)

  • Suitable for gates up to 2m per leaf.
  • Max Leaf Weight 800Kg.
  • 100°-180° Opening Angles.
  • Hydraulic Lock in Open/Close positions.
  • Manual Over-ride Switch.
  • Low maintenance and highly reliable.
  • Electronic Anti-crush Safety.
  • 240v AC Low Power Consumption.
  • Operating Temp Range -40C to + 55C.

Automatic Operators - Sliding Gates

Series 740 & 741 – Residential & Light Commercial Sliding Gate Operator (Electro-mechanical) Series 740 & 741 – Residential & Light Commercial Sliding Gate Operator (Electro-mechanical)

Series 740 & 741 – Residential & Light Commercial Sliding Gate Operator (Electro-mechanical)

  • Suitable for gates up to 12m.
  • Max Leaf Weight 740/500Kg & 741/900Kg.
  • Locked in Open/Close/Stop positions.
  • Manual Over-ride Switch - Lockable.
  • Low maintenance and highly reliable.
  • Electronic Anti-crush Safety.
  • 240v AC Low Power Consumption.
  • Operating Temp Range -20C to + 55C.
  • Add-on Obstacle Detectors

Series C720 & C721 – Residential Sliding Gate Operator (Electro-mechanical)

  • Max Leaf Weight C720/400Kg & C721/800Kg.
  • Speed C720/24mtrs per min & C721/18mtrs per min.
  • Locked in Open/Close/Stop positions.
  • Manual Over-ride Switch - Lockable.
  • Patented Vibration & Noise Reduction.
  • Master & Slave Function for double leaf gates.
  • Low maintenance and highly reliable.
  • Electronic Anti-crush Safety.
  • 24v DC Low Power Consumption.
  • Operating Temp Range -20C to + 55C.
  • Add-on Obstacle Detectors
Series 844 & 844-3P – Industrial Sliding Gate Operator (Electro-mechanical)

Series 844 & 844-3P – Industrial Sliding Gate Operator (Electro-mechanical)

  • Max Leaf Weight 844/1800Kg & 844-3P/2200Kg.
  • Speed 844/9.5mtrs per min & 844-3P/7.5mtrs per min
  • Locked in Open/Close/Stop positions.
  • Manual Over-ride Switch - Lockable.
  • Low maintenance and highly reliable.
  • Electronic Anti-crush Safety.
  • 844/240v AC & 844-3P/415v AC Low Power Consumption.
  • Operating Temp Range -20C to + 55C.
  • Add-on Obstacle Detectors
Series 884 – Industrial Sliding Gate Operator (Electro-mechanical)

Series 884 – Industrial Sliding Gate Operator (Electro-mechanical)

  • Max Leaf Weight 3500Kg.
  • Speed 10mtrs per min.
  • Locked in Open/Close/Stop positions.
  • Manual Over-ride Switch - Lockable.
  • Low maintenance and highly reliable.
  • Electronic Anti-crush Safety.
  • 844/240v AC & 844-3P/415v AC Low Power Consumption.
  • Operating Temp Range -20C to + 55C.
  • Add-on Obstacle Detectors

TCom also provide service, maintenance, repairs and support of most popular automation equipment manufacturers such as FAAC, CAME, BFT, FLOW SYSTEMS TURNSTILES, NICE, FADINI, MYHOUSE, CARDIN, TELCOMA, GIBIDI, SEA & LIFTMASTER.

Bespoke Gate Manufacture In Steel Or Timber

We also have fabrication and joinery facilities to provide you with a bespoke service for the manufacture of residential and industrial gates. We carry many designs for guidance but as our service is bespoke this does give you the opportunity to have own ideas and requirements transferred into the manufacturing process and finished product. Whether it be steel, softwood or oak your gates can be manufactured to your own design and supplied to a high quality finish ready prepared and strengthened for automatic operation.

a5  comswing_thumb7  comswing_large10   autogates  faac 740 & 741          faac 413 1